DO NOT USE FOR CUT PROTECTION!  FOR ABRASION PROTECTION ONLY!

Synthetic Armor™ Pads protect slings from abrasion damage that can be caused by contact with rough surfaces such as concrete beams and structures.  They are also used to protect finished or painted loads from marring.  These pads can be made to fit any length or width sling.  They can also be made in long lengths that the customer can cut into suitable sizes on the job.  Double or triple thickness provides resistance for more severe conditions.  A variety of materials is used to protect slings and loads depending on the degree of abrasion expected in the application.

Abrasion Protection Pad

DO NOT USE this Pad to protect sling from cutting on load edges, corners or protrusions. This padWILL NOT adequately prevent damage or failure of sling if used for cut protection. Only Pads which are tested and rated for cut protection are to be used to protect sling from cutting. DEATH or INJURY can occur from improper use or maintenance. Sling users shall be trained.

WARNING

Cornermax Pad Cut Protection Damage or misused protection can result in damage or sling failure. Inspect before each use. Inspect for cuts, tears or damage may prevent protection of the sling. Ensure protection is the correct size and type to protect the sling. Prevent pads and sling from slipping or siding across load edge. DEATH or INJURY can occur from improper use, maintenance and/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width.